Before start of Pallet Adirondack Chair DIY, you should collect the tools and necessary equipments and the pallet woods cutting in particular sizes and shapes.
1. Measure and Cut:
Use your screw driver and make holes in the pallet woods to join them with each other. Before making holes in the pallet woods, make the measurement carefully so that you do not make any mistake while joining the pallet wood.
2. Make the Base:
Prepare the basic structure or frame of the Pallet Chair by joining pallet woods including front legs and back. Create curve in both pallet woods use for sitting purpose.
3. Fix the Back:
Rest the long wood on the back in vertical direction in the middle of the two curved woods one fix on the upper and second is on the lower side. Then make a hole with drill machine to fix it on the back.
4. Lower and Upper Side:
Add another pallet wood in vertical direction creating some space at the upper side. Add all pallet woods in the vertical direction in the similar fashion creating space at the upper side but there will be no space at the lower end.
5. Ensure Space and Length:
You should take care that all the pallet Adirondack chair diy pieces are fixed with equal space and length on the upper and lower ends. Make holes with drill machine to fix with nails or screws at their perfect place. You can use a small piece of wood to maintain the equal space in between all pallet woods being fixed in the upper direction and create balance in all these pallet woods.
6. Create the Chair:
Then you can start adding the pallet woods on the two curved pallet woods already fitted in the frame of diy pallet chair to create sitting on the chair.
7. Check the fixtures:
Sit on the chair to enjoy as well as examine the Pallet Adirondack Chair that all the pallet woods are being fixed properly or not. If there is any problem, you can make it correct. You can complete fixing of pallet woods on the sitting position along the curve of already fitted two curved pallet woods in the table.
8. Make the Arms:
You can make a hole in the two pallet woods meant for the arms of the chair. These arms of chair will give you support while sitting in the chair. Make a hole with drill machine in the pallet wood already fixed in the main frame at the back. Then use nails or screws to join the arms of the chair with the hind pallet wood.
You can place this chair in the open air or in the lawn or terrace of your home and enjoy the freshness of air while sitting in it and have some rest after long day work. You can also make other Pallet Adirondack Chair DIY and enjoy with your family members.